Like with other decorative elements in the market in which we choose to renovate our house with, there are lots of wainscoting panel options from you to choose from. You won’t have to worry if your overall house design verves towards the traditional or approaching a modern one as there is always an option available. Let’s take a look at some wainscoting options that you can consider for your home interior:
Flat wainscoting panels are characterised by simple flat recessed panels. It usually comes without moulding and bevelled edges, but designs these days are slowly incorporating different elements to suit more modern home transformations. This Mission style panelling can usually be installed with one of two available methods: 1) using a sheet material that ends with mouldings or 2) doing it layer by layer beginning from the baseboard.
Existing since the Colonial era, this long-lasting wainscoting design can easily be recognised by panels in the front of the rails and stiles. Since the edges of the panels are bevelled, this creates a “raised” centre portion that stands out. Panels are usually applied individually. If your installation doesn’t extend all the way to the ceiling, you will typically end with a cap moulding just above the top rail.
If you choose to use Victorian design in your home, you’ll end up with a simple and informal atmosphere that’s perfect for relaxing in. For those who prefer something a little more elaborate, you can also include a row of flat or raise panelling just above the beadboard panelling. This type of wainscoting panel uses slim vertical boards placed directly next to each other which is locked using a tongue and groove method.
Board and Batten
For those who are unfamiliar with the term “batten”, it refers to the slim vertical pieces of wood that was originally created to hide the gaps in-between each individual board. Modern designs have eliminated the practical side of the word but if you like this Shaker-style type of simplicity for your home, you can definitely try purchasing them off-the-rack.
This type of wainscoting uses the features of both flat and raised panels. What you’ll end up with is a more elaborate design that’s perfect for both traditional and transitional homes. Most overlays use a flat panel in the centre (the overlay), therefore creating a recess look on an otherwise plain wall. If you’re a fan of Neoclassical design, this is an option you should definitely consider.
When it comes to choosing a type of wainscoting panel for the room, you need to consider if it will suit your overall design concept. Picture frame panels are a simple idea; using clean lines in a pre-fixed width to showcase either square or rectangles on a panelling. It’s more similar to the board and batten style without the addition of extra panelling. You can even choose to have more than one size or type of picture frame panelling in the same room.
This isn’t necessarily the usual home design you’ll encounter, but it does fall into the same category as it involves many of the same elements. If you’re looking for a wainscoting option that allows you to include two colours at the same time, this is definitely something you can look into. You can paint the wall one colour and then apply a different coloured frame or panelling right over it.
This style of panelling is right at home in a contemporary setting as it involves the installation of squares or diamond shapes placed directly on the backing board. Although the initial application is usually fixed, this design gives you more freedom to manipulate the overall feel based on the amount of wall space you’ll be covering. The squares or diamonds are definitely the centrepiece, which means the baseboard trim and top cap takes a back seat this time round.